I have a PV+ 600 2711P-T6C8A with a DH+ module 2711P-RN8 for communications with an SLC 5/04. I want to connect them to a sitewide network (DH+ to Ethernet via ControlLogix gateway). Before I connect them to the network, I'm trying to establish comms between the SLC and PV+ using the node numbers that will be assigned on the network. I modified the DH+ node number of both and the DH+ no. of the SLC in the PV+ terminal settings and got comms. However, on a power cycle the PV+ address reverts to its original number and comms are lost. I haven’t worked with a PV+ before and I thought the terminal was the place to set the address. If it’s required to set the address in the application file, where is this done?
Thanks.
Thanks.