The panelview 600 is connected serially with a Flexlogix 1794-L34 controller. The panelview firmware was upgraded to 5.00.08. On my laptop I am using FactoryView ME 5.00.00 (CPR 9).
On my laptop I can setup the communications so that I can read and write data to the L34. However, when I try this setup on the panelview no communications occur and I get a 'Could not set RSLinx Enterprise Data Server configuration' error when exiting the application.
I also have a Flexlogix 1794-L33 controller that I have tried and am able to setup this application so that the communications work properly between the panelview and L33.
The firmware on the 1794-L34 is R16.01.70.
Thanks for the help.
On my laptop I can setup the communications so that I can read and write data to the L34. However, when I try this setup on the panelview no communications occur and I get a 'Could not set RSLinx Enterprise Data Server configuration' error when exiting the application.
I also have a Flexlogix 1794-L33 controller that I have tried and am able to setup this application so that the communications work properly between the panelview and L33.
The firmware on the 1794-L34 is R16.01.70.
Thanks for the help.