Which compact logix processor allows for Studio logix 5000? We are wanting to be able to save the descriptions on the processor like controllogix 1756-L72 so that when someone logs in, they can upload the entire program with descriptions.
Compact Logix
- Thread starter Prayder
- Start date
Steve Bailey
Lifetime Supporting Member + Moderator
You realize, of course, that your thread is worthless to someone who might have the same question as you. Now if you had provided a link to where you found the answer....
ah yes... true... thank you for reminding me....
Here is where I found the answer:
http://ab.rockwellautomation.com/Programmable-Controllers/CompactLogix-5380-Controllers#overview
And then select the software tab and it will tell you the version of software needed.
Here is where I found the answer:
http://ab.rockwellautomation.com/Programmable-Controllers/CompactLogix-5380-Controllers#overview
And then select the software tab and it will tell you the version of software needed.
Similar Topics
Hello Everyone,
I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
gents, I am trying to configure communication with EMERSON PK300 controller through port A1 using generic ethernet communication module . I could...
I've blown the Output Transistor on the Output Card of a Compact Logix 1769-L24ER-QBFC1B
It says J378. Does anyone know the replacement part...
I am having trouble with getting no control of my analog output signal. I am using the SCL function block to control my analog output. The logic...
I was wanting to see if anyone had any information on setting up a cub5 meter and getting the data to a Allen bradley PLC. I think i have the set...