M0Dark
Member
I have 7 input meters to my Red Lion HMI and I need to get 4 readouts on the panel which give the sum of all of meters selected for that output:
I have a page on the HMI where each of the inputs can be allocated to OFF or one of the outputs.
INPUTS
FT1, FT2, FT3, FT4, FT5, FT6, FT7
OUTPUTS
Flow_Sum1, Flow_Sum2, Flow_Sum3, Flow_Sum4
Is there a way I can quickly get the Software to allocate the correct outputs dynamically rather than me writing the 128 variants of the sum out for each output?
I have a page on the HMI where each of the inputs can be allocated to OFF or one of the outputs.
INPUTS
FT1, FT2, FT3, FT4, FT5, FT6, FT7
OUTPUTS
Flow_Sum1, Flow_Sum2, Flow_Sum3, Flow_Sum4
Is there a way I can quickly get the Software to allocate the correct outputs dynamically rather than me writing the 128 variants of the sum out for each output?