dduquette2141
Member
Hello everyone,
I am looking for an easier way to configure all my IO for an OPTO22 PLC. I am developing in Codesys I have a GRV-EPIC-PR1 with a bunch of GRV-ITM-12 analog input cards. I have 10 systems that I will be configuring 96 channels per system. I know there has to be a way to configure the input channels using a function block some way I just can't seem to figure it out.
If it matters all the channels are Type K thermocouples.
This is my first time using Codesys. It has been a bit of a struggle.
I am looking for an easier way to configure all my IO for an OPTO22 PLC. I am developing in Codesys I have a GRV-EPIC-PR1 with a bunch of GRV-ITM-12 analog input cards. I have 10 systems that I will be configuring 96 channels per system. I know there has to be a way to configure the input channels using a function block some way I just can't seem to figure it out.
If it matters all the channels are Type K thermocouples.
This is my first time using Codesys. It has been a bit of a struggle.