Hello everyone, first of all thankyou for all the help you've given me through other peoples' Q&A's.
My situation is;
-I am halfway through programing a PLC
-My old computer died, so I bought a new one, which doesn't have the port for the RS232. So to counter this, I got a cable that goes from the PLC to USB ~ Problem is, in RXLinx I have no idea how to find it.
Any help on how to configure RSLinx would be greatly appreciated
Thanks
Josh
My situation is;
-I am halfway through programing a PLC
-My old computer died, so I bought a new one, which doesn't have the port for the RS232. So to counter this, I got a cable that goes from the PLC to USB ~ Problem is, in RXLinx I have no idea how to find it.
Any help on how to configure RSLinx would be greatly appreciated
Thanks
Josh