Hi Engineers,
I have two PLCs talking on Ethernet through a switch(Moxa). I am transferring data between two (via messages) and it has been working for ages till today.
The data transfer is still working but on my main PLC which has got message instruction, under the IO tree it shows exclamation mark on remote module with error code 16#0203 Connection Timeout.
moon2:
Not sure why the messages are successful even when the module says timeout.
On remote PLC I have the Main PLC in its tree which has no error.
Left is Main PLC and Right is Remote PLC.
I have two PLCs talking on Ethernet through a switch(Moxa). I am transferring data between two (via messages) and it has been working for ages till today.
The data transfer is still working but on my main PLC which has got message instruction, under the IO tree it shows exclamation mark on remote module with error code 16#0203 Connection Timeout.
moon2:
Not sure why the messages are successful even when the module says timeout.
On remote PLC I have the Main PLC in its tree which has no error.
Left is Main PLC and Right is Remote PLC.