scimdarren
Member
Hi All
Step 7 in ladder again folks!
I have a PID loop already configured, now I now wish to have a Profibus configured VFD to be controlled off the same output. Ie. The VFD (Control Word) and my PID Output (REAL) are to be directly proportional.
How would I achieve this by means of converting the REAL(MD) PID Control Variable to my PROFIBUS CNTROL WORD (MW)?
Thanks
Darren
Step 7 in ladder again folks!
I have a PID loop already configured, now I now wish to have a Profibus configured VFD to be controlled off the same output. Ie. The VFD (Control Word) and my PID Output (REAL) are to be directly proportional.
How would I achieve this by means of converting the REAL(MD) PID Control Variable to my PROFIBUS CNTROL WORD (MW)?
Thanks
Darren