Hey there
Very new to CodeSys, and an intermediate beginner in PLC's generally.
Im trying to setup a new smart home system, for training purposes mostly.
Using a Raspberry Pi, CodeSys and a Philips Hue system.
So far I, think, I've been able to send a PUT command using the HTTP client.
But with no results. I do get a "xDone" back from the fb, but I think I'm doing something wrong in the convertion "pointer to wstring".
It looks like I'm sending this: "≻湯㨢牴敵}" and not {"on":true}
Been searching for answers for this for a while now, but getting nowhere fast.
Hope some of you can steer my in the right direction with this
Very new to CodeSys, and an intermediate beginner in PLC's generally.
Im trying to setup a new smart home system, for training purposes mostly.
Using a Raspberry Pi, CodeSys and a Philips Hue system.
So far I, think, I've been able to send a PUT command using the HTTP client.
But with no results. I do get a "xDone" back from the fb, but I think I'm doing something wrong in the convertion "pointer to wstring".
It looks like I'm sending this: "≻湯㨢牴敵}" and not {"on":true}
Been searching for answers for this for a while now, but getting nowhere fast.
Hope some of you can steer my in the right direction with this
Last edited: