Hi, I'm new here and getting into plc's. Haven't did much with them since college so doing some refresh.
Friend has this rotissery thing he wants to use as a welding fixture. Has a Yasakawa CACR-SR drive and AB SLC 5/03 with SLC servo, Input, Output modules. Also included with the thing is a Panelview 550. I believe this thing was interfaced with a robot at one point for whatever. The program is long gone due to the dead battery and I have no idea where to start with regards to programming the servo. All he wants this thing to do is turn when a pedal is pushed. I'm not sure what other information is needed but any help would be great!
thanks
Friend has this rotissery thing he wants to use as a welding fixture. Has a Yasakawa CACR-SR drive and AB SLC 5/03 with SLC servo, Input, Output modules. Also included with the thing is a Panelview 550. I believe this thing was interfaced with a robot at one point for whatever. The program is long gone due to the dead battery and I have no idea where to start with regards to programming the servo. All he wants this thing to do is turn when a pedal is pushed. I'm not sure what other information is needed but any help would be great!
thanks