Controllogix with SST Profibus card

I have taken the most problematic sensor and wrapped it with plastic a
layer of insulation and some more plastic. Only have about 12 hours of data so far but it looks like it has calmed down. More later.
 

Similar Topics

W
AB controllogix, Molex profibus SST card and Siemens MicroMaster 440 & Sinamics G150
AB controllogix, Molex profibus SST card and Siemens MicroMaster 440 & Sinamics G150 Hi, I have project which use AB Controllogix as PLC and...
Replies
1
Views
4,961
wilsonzhu
W
W
BradCommunication Profibus SST-PB3-CLX-RLL clard in Controllogix
Hi, We are planning to use Bradcommunication's SST-PB3-CLX-Rll profibus in Controllogix platform, I have a look at the menual and tested in the...
Replies
0
Views
2,938
wilsonzhu
W
I
SST Profibus Controllogix
I am using a Controllogix PLC with an SST profibus card SST-PFB-CLX-RLL. I configured it and it works well. I have one major issue. When I cycle...
Replies
13
Views
11,126
bornwild
B
L
ControlLogix, SST Profibus DP Interface Card and Hesch Baghouse Controller
Hi all, This is my first time on the forum so please forgive me if I don't explain things correctly. I am trying to find some sample code that...
Replies
0
Views
7,745
Lamia
L
T
ControlLogix Redundancy Module Single Mode Fiber
Why does the controllogix redundancy modules use a single mode fiber vs multimode fiber?
Replies
1
Views
86
Ken Moore
Ken Moore
Back
Top Bottom