I am adding a msg instruction to do a SLC type read to a
SLC 5/05 from a control logix both sitting on our network. there are several msg commands in the controllogix all ready and functioning.
when I have added a msg command previously and now
the conditional bits preceding the msg command don't toggle.
(DN ER EN) what am I not doing correct.
SLC 5/05 from a control logix both sitting on our network. there are several msg commands in the controllogix all ready and functioning.
when I have added a msg command previously and now
the conditional bits preceding the msg command don't toggle.
(DN ER EN) what am I not doing correct.