Ken Roach
Lifetime Supporting Member + Moderator
Hi guys,
What's the state of the art these days for creating *.LDB files for non-S7 Profibus DP masters ?
Years ago I would have used COM Profibus 5.10. I've set up Hilscher scanners using their SYCON software.
And I think I'd be using Step7 or TIA if the master was a Siemens S7 controller.
The target is an Kuka robot with a distributed Profibus DP I/O network with Turck I/O modules. Each vendor is pointing at the other with puzzled looks on their faces.
[Edit.. this one's in the Kuka lab, not the ABB lab)
What's the state of the art these days for creating *.LDB files for non-S7 Profibus DP masters ?
Years ago I would have used COM Profibus 5.10. I've set up Hilscher scanners using their SYCON software.
And I think I'd be using Step7 or TIA if the master was a Siemens S7 controller.
The target is an Kuka robot with a distributed Profibus DP I/O network with Turck I/O modules. Each vendor is pointing at the other with puzzled looks on their faces.
[Edit.. this one's in the Kuka lab, not the ABB lab)
Last edited: