gmarowski
Member
I'm new to Crimson (this is my first week, and I just ran into my first road block.
I'm trying to display the position of a rail car, running in a straight line, using pre made bmps. There are 22 bmps that reflect these positions based on an integer from the PLC, but using the Crimson IMG primative, it only allows 10. Is there any other way to display these bmps without using the IMG primative?
I was thinking there might be a way to define a space/area and and display the bmps in that area, but I haven't figured out a way to do it.
Any help is greatly appreciated!
I'm trying to display the position of a rail car, running in a straight line, using pre made bmps. There are 22 bmps that reflect these positions based on an integer from the PLC, but using the Crimson IMG primative, it only allows 10. Is there any other way to display these bmps without using the IMG primative?
I was thinking there might be a way to define a space/area and and display the bmps in that area, but I haven't figured out a way to do it.
Any help is greatly appreciated!