Hi all,
Is it possible with cx-configurator to upload the profibus network with the slave address mapping?
I tried but failed with a CJ1W CPU22 and PRM21 master module. I had to rebuild the entire network from scratch. Luckily the original integrator used the automatic address assignment and had the slaves inserted in sequential order otherwise i would have been screwed.
Surely this is not the case? I know with siemens when you upload the hardware config you get the slave address mapping.
Is it possible with cx-configurator to upload the profibus network with the slave address mapping?
I tried but failed with a CJ1W CPU22 and PRM21 master module. I had to rebuild the entire network from scratch. Luckily the original integrator used the automatic address assignment and had the slaves inserted in sequential order otherwise i would have been screwed.
Surely this is not the case? I know with siemens when you upload the hardware config you get the slave address mapping.