Hi,
I have a small danfoss FC302 VSD giving a Mech brake low [A63] alarm once or twice a day for some reason. There is no brake and the only I/O wiring is a start signal and a relay output for 'fault'. None of the digital or relay outputs are set to mechanical brake and all the brake settings under 2-20 are set to zero.
Any ideas why this would be popping up ??
Thanks,
Tony.
I have a small danfoss FC302 VSD giving a Mech brake low [A63] alarm once or twice a day for some reason. There is no brake and the only I/O wiring is a start signal and a relay output for 'fault'. None of the digital or relay outputs are set to mechanical brake and all the brake settings under 2-20 are set to zero.
Any ideas why this would be popping up ??
Thanks,
Tony.