paul95m3
Member
I have built a interface cable to connect the M12 Micro Connector on the Devicenet NetMeter to the Allen Bradley MCC buss with the open style screw connector. I have quadruple checked the pinout and checked with a ohm meter. Here is the pinout:
M12 Female*****Wire Color********Devicenet Open Style (MCC Buss)
Pin#____________________________Pin #
1 Drain**********Brown***********3
2 V+************White***********5 Red
3 V- ************Blue************1 Black
4 Can_H*********Black***********4 White
5 Can_L*********Grey************2 Blue
The NetMeter shows "OL" on the display, no matter which MCC I plug into.
Does anybody have any ideas?
We are having devicenet issues on one of our MCC's, and I was hoping to use the NetMeter to possibly find the cause with the network.
Thanks in advance.
M12 Female*****Wire Color********Devicenet Open Style (MCC Buss)
Pin#____________________________Pin #
1 Drain**********Brown***********3
2 V+************White***********5 Red
3 V- ************Blue************1 Black
4 Can_H*********Black***********4 White
5 Can_L*********Grey************2 Blue
The NetMeter shows "OL" on the display, no matter which MCC I plug into.
Does anybody have any ideas?
We are having devicenet issues on one of our MCC's, and I was hoping to use the NetMeter to possibly find the cause with the network.
Thanks in advance.
Last edited: