darren_m_green
Member
- Join Date
- Jan 2003
- Posts
- 4
I have a client who has replaced an obsolete HMI with a PROFACE 2400.
The original HMI was connected to the AB PLC5 using the DF1 full duplex protocol.
HOW CAN I USE DF1 POINT TO POINT (FULL DUPLEX) TO COMMUNICATE BETWEEN THE AB PLC5 AND THE PROFACE 2400?
The original HMI was connected to the AB PLC5 using the DF1 full duplex protocol.
HOW CAN I USE DF1 POINT TO POINT (FULL DUPLEX) TO COMMUNICATE BETWEEN THE AB PLC5 AND THE PROFACE 2400?