DF1 unknown CMD FNC

[chudchud]

I'm come across a CMD=0F and FNC=AB while going through the serial data stream to a SLC5/05. The DF1 command set and AB websitt does not refer to this CMD and FNC combination., chapter 7. I cannot find this CMD and FNC combo.

Does anybody know the exact data structure for this command?

Any help would be appreciated. Thank you.

 

[jimbo3123]

What were you doing over the serial link at the time that you saw that CMD/FNC?

 

[chudchud]

I sent a control out to the SLC (N9 registers) over RSLinux.

 

[cjh]

Look at the bottom of this page: http://iatips.com/pccc_tips.html

It has a pretty good explanation of it.