Different between Mitsubishi Melsecnet/Mini and Melsecnet/Mini-S3

darren_hcf

Member
D
Join Date
Feb 2009
Location
malaysia
Posts
2
Hi, currently i have a Mitsubishi Melsecnet/Mini module installed in the A-Series PLC system. But this module no longer functional and I've bought another refurbish module which is Melsecnet/Mini-S3 module.

May I know is it possible that I change the Melsecnet/Mini-S3 to replace the broken Melsecnet/Mini module? Are both of this modules can be interchangeable?

Your prompt will be appreciate, thanks.
 

Similar Topics

A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
135
mk42
M
R
TCP data transfer between 2 Siemens PLC's on different subnets?
Hi, If we have PLCs on different subnets is it possible to do TCP comms data transfer between them? I'm assuming if we use a routing switch and...
Replies
3
Views
824
Corsair
C
M
Wiring interaction between two enclosures with different power sources
Is there any issue introducing wires from a different power supply to my enclosure? Currently, I have an HMI that will be powered by one...
Replies
6
Views
1,731
James Mcquade
J
A
What is the different between Allen Bradley Homing Types
Active Homing When the axis Homing Mode is configured as Active, the physical axis is first activated for servo operation. As part of this...
Replies
2
Views
1,853
amiraizat124
A
N
Communication between ArchestrA IDE and OPC RSLinx server between different machines
Hey! In my previous queries on how to handle an OPC server like RSLinx in the ArchestrA IDE galaxy, I have succeeded and the answer was to just...
Replies
0
Views
1,828
NathBarreiros
N
Back
Top Bottom