I am not a Automation Direct programmer. I have done a lot of RS500
I have the DS5 software and I am able to look at the program. I am reaching out to the guy who wrote the program but in the mean time, I have some questions
This is a DL06 system which consists of 5 units each with ECOM cards and
I believe they all communicate with each other. Their are also small screens
on each unit along with a larger main screen.
My main question is I have some contacts in my 1st unit (feed section)
C1505 That when I find all there is no Coil.
This could be coming from a screen? Or could it be written from another unit over ethernet?
Attached is a couple screen shots of the C1505 contact. It is keeping C60
from energizing and letting the machine feed. I have also attached a zip with all the programs. any help would be appreciated.
I don't even know how to edit this program or I would remove these bits since all the others are all I need to interrupt my feed.
Any help appreciated Thanks
I have the DS5 software and I am able to look at the program. I am reaching out to the guy who wrote the program but in the mean time, I have some questions
This is a DL06 system which consists of 5 units each with ECOM cards and
I believe they all communicate with each other. Their are also small screens
on each unit along with a larger main screen.
My main question is I have some contacts in my 1st unit (feed section)
C1505 That when I find all there is no Coil.
This could be coming from a screen? Or could it be written from another unit over ethernet?
Attached is a couple screen shots of the C1505 contact. It is keeping C60
from energizing and letting the machine feed. I have also attached a zip with all the programs. any help would be appreciated.
I don't even know how to edit this program or I would remove these bits since all the others are all I need to interrupt my feed.
Any help appreciated Thanks