amm
Member
Hello I was hoping I could get some guidance, on how to best modify a program I have running a lifecycle test station, with 3 electronic locks being tested at the same time.
My current program has an error check which is using the Event part of the EDRUM to look for a failure of an electronic lock to stay locked.
It currently uses 3 consecutive EDRUMs one for each section of the lifecycle test. I was hoping to use 3 MDRMD instead but they aren't the easiest things to set up. At least that is what I have learned so far.
The project files are linked to below.
https://drive.google.com/drive/folders/0B_7OqHpsv7NDc01udVVEVWFCZFE?usp=sharing
My current program has an error check which is using the Event part of the EDRUM to look for a failure of an electronic lock to stay locked.
It currently uses 3 consecutive EDRUMs one for each section of the lifecycle test. I was hoping to use 3 MDRMD instead but they aren't the easiest things to set up. At least that is what I have learned so far.
The project files are linked to below.
https://drive.google.com/drive/folders/0B_7OqHpsv7NDc01udVVEVWFCZFE?usp=sharing