YoungWint
Member
I have a potential project using some RMUs using DNP3 communication protocols.
The project has been scoped to use S7300 plcs so I need a way of getting the data from the RMUs (DNP3) to the S7 300 plcs, preferably over Ethernet, but could if necessary go to Profibus.
Has anybody used DNP3 on an S7 300 platform and be able to point me in the right direction with what hardware and software might be required.
The project has been scoped to use S7300 plcs so I need a way of getting the data from the RMUs (DNP3) to the S7 300 plcs, preferably over Ethernet, but could if necessary go to Profibus.
Has anybody used DNP3 on an S7 300 platform and be able to point me in the right direction with what hardware and software might be required.