Ariel Danez
Member
I have an Allen Bradley Controllogix PLC with a CLX Ethernet/IP 10/100 Bridge Module-Twisted. It was originally designed purely for Data Acquisition and shall be integrated to a SCADA System using Ethernet Protocol thru a Hirchsmann Fiber Optic Switch. Plan was changed and we have to integrate it now to an SCADA System using a DNP3 Protocol. We dont have any experience in this type of protocol. Should I need an extra Gateway in between my AB CLX Ethernet/IP Module and the DNP3 based SCADA Sytem ? Any System Integrator I can contact with specifically