Hi everyone. I'm trying a egd communication between an IC697CPX935 CPU with a IC697CMM742 ethernet card, and a IC200CPUE05, with proficy machine edition and without server.
Is the first time, i do an egd comm, but i'm working with plc's and communications and nets since 12 years ago.
The configuration in the first plc (...CPX935, ip:129.1.100.10) is:
Produced Exchanges >>
ID = 1
Destination type = ip address
Destination = 129.1.100.140
Produced period = 200
Message lenght 64 bytes.
In the second plc (IC200CPUE05, ip: 129.1.100.140):
Consumed Exchanges >>
Producer ID: 129.1.100.10
Group ID = 0
Exchange ID = 1
Produced period = 200
Message lenght 64 bytes.
In the producer plc, i've generated a counter in the first word, to check in the second plc.
This doesn't work. I've tested the producer against a pc with wireshark software and the first (producer one) plc, send the message ok.
Any idea?. Anything more to check?.
Thanks in avance.
Is the first time, i do an egd comm, but i'm working with plc's and communications and nets since 12 years ago.
The configuration in the first plc (...CPX935, ip:129.1.100.10) is:
Produced Exchanges >>
ID = 1
Destination type = ip address
Destination = 129.1.100.140
Produced period = 200
Message lenght 64 bytes.
In the second plc (IC200CPUE05, ip: 129.1.100.140):
Consumed Exchanges >>
Producer ID: 129.1.100.10
Group ID = 0
Exchange ID = 1
Produced period = 200
Message lenght 64 bytes.
In the producer plc, i've generated a counter in the first word, to check in the second plc.
This doesn't work. I've tested the producer against a pc with wireshark software and the first (producer one) plc, send the message ok.
Any idea?. Anything more to check?.
Thanks in avance.