CallumMacEwen
Member
Hi All,
First time I have ever worked with encoders and I am having a slight issue. The encoder is set up counts up and down and works well for the most part.
Every now and then though when the motor stops the encoder will still increase.
I have verified that the motor has stopped and I have checked the voltage coming from the encoder and it is not pulsing.
Does anyone have any idea why this might be happening?
First time I have ever worked with encoders and I am having a slight issue. The encoder is set up counts up and down and works well for the most part.
Every now and then though when the motor stops the encoder will still increase.
I have verified that the motor has stopped and I have checked the voltage coming from the encoder and it is not pulsing.
Does anyone have any idea why this might be happening?