chavak
Member
- Join Date
- Jul 2002
- Posts
- 750
Hi,
Based on the eds file given from Epson, when added in a robot device in the IO tree, with 32 bytes of input and 32 bytes of output, the controller tags shows only a single boolean tag to indicate connection faulted status. When go online the status shows, connected and module info shows the device correctly. No other data elements shows up. I'm using Studio 5K V32. Epson is configured using RC7.0+
Anybody encounter this and how did you solve it
Thank You
Based on the eds file given from Epson, when added in a robot device in the IO tree, with 32 bytes of input and 32 bytes of output, the controller tags shows only a single boolean tag to indicate connection faulted status. When go online the status shows, connected and module info shows the device correctly. No other data elements shows up. I'm using Studio 5K V32. Epson is configured using RC7.0+
Anybody encounter this and how did you solve it
Thank You