sweety616
Member
I am getting a timeout error 308 on my panelviews. They are on ethernet network communicating with SLC 5/05. Please help
Thanks
Sushma
Thanks
Sushma
Error 308 Panelview 600
- Thread starter sweety616
- Start date
RSL
Member
User Manual Link
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711-um014_-en-p.pdf
All the error codes are in it.
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711-um014_-en-p.pdf
All the error codes are in it.
Similar Topics
PV1000 connected to SLC/4 via DH+
System has been working for years.
This SLC/4 talks with other SLC/4’ s
via Ch0 (DH485, 19.2k) connected to a...
Hey everyone,
Had a weird thing happen to me a couple of times yesterday. I was working in the field with the G308 that I programmed. I went to...
I am kind of new to GE products, but we have several in my area. I made a minor logic change and it verified good, but when I tried to download I...
Hi,
I'm currently having issued with a PowerFlex 252. It was working fine last week, and suddenly decided to stop working. When I go into...
Hi there,
I'm new to plc programming and was wondering why I get this error code when I run my simulation for these temperature sensors?
What I'm...