errors send ON - line edit changes plc program CPM1A

[iant]

see if this is better

you should be able to go directly online dont upload over it

 

[iant]

I have taken the protection off in the settings as you tried.
Also untagged the protection that I showed untagged in my earlier Gif file

 

[ngoclan]

see if this is better

you should be able to go directly online dont upload over it

dear iant
I to do follow you just for me, but without success ,
I open five of you sent for me after I download to plc again, but can't donwload to plc
i have a question for your help. I have found errors when I transfer to plc . those errors are shown that I send attach video file. could you help me
how to fix those errors ???
thank you so much for your time and consideration.

https://www.dropbox.com/s/2xekyziljnan3fa/Untitled.mp4?dl=0

 

[osmanmom]

after setting and transfer

recycle the PLC power supply.

 

[ngoclan]

after setting and transfer

recycle the PLC power supply.

thank you very much
You make for me an example
now I am understand
thank you again
have a nice day