lostcontrol
Lifetime Supporting Member
Any users/experts out there?
I have just spent the last while trying to make an animation property work.
This project has a series of images (Off/On) etc that are linked to the same tag.
Tag==1, Tag!=1, Tag==2, Tag!=2, Tag==3, Tag!=3 etc..
All work as expected, except the Tag==1 condition.
I have tried re-assigning the working image to ==1 to rule out any specific properties that may not be seen, but same result
Have even gone as far as creating some new lamps with the same conditions & the result is exactly the same..
One thought was that it was because I was testing using the simulator, but is the same when downloaded to unit.
edit:
achieves the result of Tag==1 so at least I have a workable solution
Not really an edit, just thought of this solution in between writing this...
maybe someone has come across it, or it is a genuine bug. Will submit to our local distributor at least.
Version was 4.0.0, but just updated to 4.5.0 & is still there.
rock on
I have just spent the last while trying to make an animation property work.
This project has a series of images (Off/On) etc that are linked to the same tag.
Tag==1, Tag!=1, Tag==2, Tag!=2, Tag==3, Tag!=3 etc..
All work as expected, except the Tag==1 condition.
I have tried re-assigning the working image to ==1 to rule out any specific properties that may not be seen, but same result
Have even gone as far as creating some new lamps with the same conditions & the result is exactly the same..
One thought was that it was because I was testing using the simulator, but is the same when downloaded to unit.
edit:
Code:
Tag>=1 && Tag<=1
Not really an edit, just thought of this solution in between writing this...
maybe someone has come across it, or it is a genuine bug. Will submit to our local distributor at least.
Version was 4.0.0, but just updated to 4.5.0 & is still there.
rock on