showshocka
Member
OK. So I'm in the process of Mirroring a new Laptop to the old one. I'm Running FTV ME Station 8.00.00 (CPR 9 SR 7), FTVS for ME 8.00.00 (CPR 9 SR 7) and the ME Transfer Utility...Which all of these are the exact same Programs and Versions that I have installed on my other laptop which always works with no problem in logging into the Panelview. I'm using the same .mer file as I always do and I select it to logon to my Panelview Plus 6_1500. The logon goes good, the Operators Main Screen comes up. The Time is current and ticking by the second on the Main Screen. When I go on to all the other screens the to see the info, at first they all show as Question marks where info is supposed to be, where the Line's info would be, than it just goes to nothing, empty whit boxes. I also log on without replacing the Project's Communication with my terminal, it always have asked me that. The only thing that I do notice is that it does not ask me anymore before I log on, might not be a problem... I'm just trying to describe all the minor details as well. Any ideas of what any of this means? I've included somewhat of an example jpeg. Thanks.....