DamianInRochester
Lifetime Supporting Member
FactoryTalk View Studio ME
Ver 5.10.00 CPR 9 SR 2
I have been completely unsuccessful at getting the ShortCut definer in Communication Setup to Verify my file.
After I create the shortcut and assign the ACD file and hit verify I get.
******************************************************
Shortcut 'L23E':
- Note: No path to Design device is assigned.
- Offline tag file assigned and file found on workstation.
- Warning: No path to Runtime device is assigned.
*******************************************************
When I hit the Copy from Design Time to Runtime button it says
"Select a different Path -- M6500XP cannot be used."
When I create a runtime file it says
******************************************************
*** Start RSLinx Enterprise Conversion Messages ***
WARNING: Unconfigured shortcut detected. Shortcut name = "L23E". Description: The system has detected that the noted shortcut has not been associated with a device on the Runtime (Target) tab. If the application makes use of this shortcut, then runtime errors will be detected and logged when the application attempts to use that shortcut.
*** End RSLinx Enterprise Conversion Messages ***
Validation completed with warnings. The runtime application has been created.
CAUTION: Running this application might produce errors at runtime.
***********************************************************
After about 4+ hours I am at a loss.
I should also add that I do in fact see the tags (they are available) from the ACD file when I am assigning tags to devices.
Ver 5.10.00 CPR 9 SR 2
I have been completely unsuccessful at getting the ShortCut definer in Communication Setup to Verify my file.
After I create the shortcut and assign the ACD file and hit verify I get.
******************************************************
Shortcut 'L23E':
- Note: No path to Design device is assigned.
- Offline tag file assigned and file found on workstation.
- Warning: No path to Runtime device is assigned.
*******************************************************
When I hit the Copy from Design Time to Runtime button it says
"Select a different Path -- M6500XP cannot be used."
When I create a runtime file it says
******************************************************
*** Start RSLinx Enterprise Conversion Messages ***
WARNING: Unconfigured shortcut detected. Shortcut name = "L23E". Description: The system has detected that the noted shortcut has not been associated with a device on the Runtime (Target) tab. If the application makes use of this shortcut, then runtime errors will be detected and logged when the application attempts to use that shortcut.
*** End RSLinx Enterprise Conversion Messages ***
Validation completed with warnings. The runtime application has been created.
CAUTION: Running this application might produce errors at runtime.
***********************************************************
After about 4+ hours I am at a loss.
I should also add that I do in fact see the tags (they are available) from the ACD file when I am assigning tags to devices.
Last edited: