Hi, Guru's,experts. I have done serval searches on control net with not much luck. Does anyone of a good self help tutoral on adding nodes to an existing control net. I have a project in wich i need to add a panelview + to a controllogix controlnet network could do this via e-net but there is no cost effective way to run e-net to this location.i have attached 1 of the.cx files.The acd file ziped exceeds posting limit. any help would be nice. I just need to be sure i'm on the right track THANKS, steve also the hardware I'm adding is 2711p-rdt10c w/ 2711p-rn15s controlnet module. I would like to add an extra node? for another hmi down the road is possible? just a thought i need to do this by 9/6/2011 do i have time to learn what i need to know or should i hire this done? this is a critcal system and it is only shutdown on holidays.Thanks,
Last edited: