KirillIvanov
Member
Hello everyone.
Quick Newbie FFL question.
As far as I understand from YouTube etc. FFL should be energized by True condition from the left. Like:
True |------------------| FFL works
I've put a bit from the left to control the loads but it appears that it works only when this bit is not energized. Please see EN conditions on Screenshots.
Screenshot 1 - Shceme.
Screenshot 2- the only condition I've got FFL to work.
Every time I put a new number at N7:70 it's loaded to FFL no matter if B3:1/1 energized or not. I assumed that B3:1/1 can be removed if it doesn't change anything but it doesn't work with empty condition.
Screenshot 3 0 > 0 which should be False gives a green on EN.
Is this normal or my Emulator doing miracles?
Thank you.
It's 1100 Series B running on RSLogix Emulate 500
Quick Newbie FFL question.
As far as I understand from YouTube etc. FFL should be energized by True condition from the left. Like:
True |------------------| FFL works
I've put a bit from the left to control the loads but it appears that it works only when this bit is not energized. Please see EN conditions on Screenshots.
Screenshot 1 - Shceme.
Screenshot 2- the only condition I've got FFL to work.
Every time I put a new number at N7:70 it's loaded to FFL no matter if B3:1/1 energized or not. I assumed that B3:1/1 can be removed if it doesn't change anything but it doesn't work with empty condition.
Screenshot 3 0 > 0 which should be False gives a green on EN.
Is this normal or my Emulator doing miracles?
Thank you.
It's 1100 Series B running on RSLogix Emulate 500
Last edited: