first line

[jsmith6752]

I am attempting to reprogram our GE Series one controller. I have the memory completely cleared. The first line I need to enter is the one that has me confused. After that I think I can manage. The programer is the one that plugs into the front of the PLC. It's probably not considered a hand held??? If someone could walk me through the first line I would appreciate it. If possible walk me through the key stroke to enter this line....thanks

 

[jrwb4gbm]

It has been too long since I used the hand held programmer but maybe this will help.
Link to manual, see chapter four and five for proramming, see pages 5-21 and 5-28 for a sample of keystrokes for entering code: http://www.*********.com/pdfs/90842c.pdf
See this old thread, might be something there that will help.
Link: http://www.plctalk.net/qanda/archive/index.php/t-9875.html
I googled "ge series one hand held programmer manual" (without the quotes), to find that old thread.
Steve Bailey is the resident expert, maybe he will check in soon to help.