fhervrylesestoso
Member
Hi Guys,
I'm facing a huge problem now. I hope someone had already encountered this problem .
So here's the set up:
-Wonderware will get the data from FactoryTalkView via FSGateway.
-in order for Factory Talk view to give data we used Factorytalk Gateway.
-Wonderware is for "read only" purpose
-We have 2 Workstations
> OWS 1 for Wonderware, FSGateway was installed here.
> OWS 2 for FactoryTalk View, Factory Talk was installed here.
I set up the FS Gateway, set Factory Talk Gateway as an OPC server.
Now, I got this -/W status which means a failure to read. I already set the DCOM settings of FTGateway to "none"
I'm facing a huge problem now. I hope someone had already encountered this problem .
So here's the set up:
-Wonderware will get the data from FactoryTalkView via FSGateway.
-in order for Factory Talk view to give data we used Factorytalk Gateway.
-Wonderware is for "read only" purpose
-We have 2 Workstations
> OWS 1 for Wonderware, FSGateway was installed here.
> OWS 2 for FactoryTalk View, Factory Talk was installed here.
I set up the FS Gateway, set Factory Talk Gateway as an OPC server.
Now, I got this -/W status which means a failure to read. I already set the DCOM settings of FTGateway to "none"