dginbuffalo
Member
Hello. I'm wondering if anyone could provide some insight on an issue I'm having. I’m working on a current project of converting a View32 to FTV SE application. I’m running into an issue where none of our string tags are loading up. I’m a little confused as to what the HMI tag is referencing in the PLC. Attached is a screenshot of one of the tags that doesn’t load. I’m not sure what the ,M,SC82 in the address means. The PLC tag it’s pointing at is not a string tag either- it’s a SINT array, length 82. The application works fine on the RSView32 computer, just not the FTV SE system that I am testing remotely. Any ideas? Thanks in advance!