I have been trying to communicate with a inoperable GE Fanuc 90-30.
Using Versapro 1.1 on a windows 7. Using a new usb converter cable # IC690USB901 and also tried a "cheater cable-serial type) to no avail.
currently onthe power supply the green power and ok leds are lit. There is no run led showing (lit)
Any words of wisdom would be greatly appreciated.
Using Versapro 1.1 on a windows 7. Using a new usb converter cable # IC690USB901 and also tried a "cheater cable-serial type) to no avail.
currently onthe power supply the green power and ok leds are lit. There is no run led showing (lit)
Any words of wisdom would be greatly appreciated.