GE Versamax CPU005 end of life?

timothy585

Supporting Member
Join Date
Apr 2021
Location
Cajun Country
Posts
47
Can someone tell me the status of the CPU005 processor? I have a customer with a half dozen of these and I'm having a hard time finding info on them online. Has the Versamax product reached it's end-of-life, i.e. is it still supported by the manufacturer?

I was able to get online with it using ME 9.5, but the customer wants to know if an upgrade is in order. What current GE product line would be a good fit for an application this size? It's a 5-slot rack, not counting processor/ethernet.

Thanks.
 
Emerson purchased the GE PLC products a few years ago.

I don't see a CPU005 listed as a product, but I do see a CPUE05. That does not mean the CPU005 is not available.

You should contact an Emerson distributor. Try this link
 

Similar Topics

I have one GE Fanuc IC200PNS002-AC Versamax Network Interface Module and the fault red light is blinking and i have checked in manual it is...
Replies
9
Views
222
Hi, The VersaMax PLC suddenly stop running (no LED on run function) so I'm trying to upload the program. The HMI connected to it says "Host...
Replies
0
Views
138
I do have a problem with a GE Versamax micro PLC. By going online (on Port 1) the "OK led" goes down. Power led stays On Port 2 no reaction at...
Replies
4
Views
396
Hi, I am trying to set the IP address on the IC200UEM001 Ethernet Option Module. I am following the procedure in the manual for setting a...
Replies
1
Views
434
I have a new computer and it doesn't have an ethernet port. I am trying to connect to the Versamax Micro Plus with a type c to ethernet adapter...
Replies
7
Views
1,254
Back
Top Bottom