Ge9030 to Ge9030 via CMM311s

David Siki

Member
D
Join Date
Dec 2010
Location
Tabubil, Ok Tedi Mining site
Posts
3
I want to establish communication between two Gefanuc 9030 Plcs using two respective CMM311 cards. I have selected CMM only protocals with RS323 connection settings.

If anyone had done a similar set up like this before pls I need some assistance in terms of communications protocal selections, port selections and cabling.

Thanks alot in advance for any assistance.

Merry X'mas
David
 

Similar Topics

K
Adding Comms to GE9030 with 313 CPU
I'm servicing a machine with a IC693CPU313W CPU. This is the low cost embedded type. Per Steve Bailey's post # 2 here in this thread, I can't use...
Replies
2
Views
1,224
keithkyll
K
D
Ge9030 CMM311 to Radio Telemetry
Here there, I am working on a project to send Gefanuc 9030 PLC data via its CMM311 card to put on a radio telemetry link to be sent to another...
Replies
2
Views
1,490
David Siki
D
K
Ge9030
Can the 9030 software run in the XP enviorment? Have a customer thats needs some debugging. I haven't talked to a 9030 in many moons, last...
Replies
3
Views
1,931
Steve Bailey
Steve Bailey
R
Ge9030 Pbm200
Hi all, I am using a GE 9030 /CPU311 and a PBM200 Profibus module. I have a distint blinking patten on the PBM LEDs but cant find any info in...
Replies
3
Views
2,373
RussB
RussB
M
GE9030 CMM321 to SCADA!
Hello, Is there any program logic required for a cmm321 card to allow SCADA to talk to it? I have configured the IP address of the card...can...
Replies
5
Views
3,429
Steve Bailey
Steve Bailey
Back
Top Bottom