Peter Nachtwey
Member
Hi guys, I am in an aluminum plant trying to help confure an S5 with Profibus to talk to our controller. We have the communications working reading and writing 8 registers each way. The problem is that the S5 PLC program can not read the data. We are trying to use a IM308C block. The parameters for a read are
DPAD = F800
IMST = 0,3 // The RMC is node 3
FCT = RI
GCGR=00000000 00000000
TYP=0,10
STAD= +0
LENG= +16
Are we going about this correctly? I know nothing about S5.
Peter Nachtwey
DPAD = F800
IMST = 0,3 // The RMC is node 3
FCT = RI
GCGR=00000000 00000000
TYP=0,10
STAD= +0
LENG= +16
Are we going about this correctly? I know nothing about S5.
Peter Nachtwey