Gsi
Guest
G
Hello!
I could realy use some help.
I tried a sujestion that someone post here about converting 4-20ma to 0-5V. Everithing look OK and I tested with the multimeter, but when I connect my terminal board to the board in the PC that as the AD converter, the value of the tension starts floating.
Tkx in advance
I could realy use some help.
I tried a sujestion that someone post here about converting 4-20ma to 0-5V. Everithing look OK and I tested with the multimeter, but when I connect my terminal board to the board in the PC that as the AD converter, the value of the tension starts floating.
Tkx in advance