Hi friends;
I have a high speed counter module IC693APU300J. In our system the frequency range is 0 to 12000 HZ and the amplitude range is 0.5 v to 10V. I can not understand how i fix and configure the module in the system to read the correct frequency from Gas flow meter, and rotational frequency of gas turbine from Magnetic pickup.
Kindly guide me how i connect the Mag pickup wires to the module, configration and how i apply in ladder logic?
Regards
I have a high speed counter module IC693APU300J. In our system the frequency range is 0 to 12000 HZ and the amplitude range is 0.5 v to 10V. I can not understand how i fix and configure the module in the system to read the correct frequency from Gas flow meter, and rotational frequency of gas turbine from Magnetic pickup.
Kindly guide me how i connect the Mag pickup wires to the module, configration and how i apply in ladder logic?
Regards