Hitachi JH300 changes carrier freq. by itself

david90

Member
D
Join Date
Apr 2010
Location
ca
Posts
202
I have a JH300 and the carrier freq. changes by itself. From 0-45hz, the carrier freq is about 3khz (from scope) but for some reasons the carrier freq sharply decreases to 1.5khz when @ 45hz and above. The effect of this is a decrease in motor sound pitch and I could observe the lower carrier freq on the scope also. The overall waveform looks good.

I would like to know if this is a defect or just one of the drive's feature.
 

Similar Topics

xzen
Hitachi EC instructions and functions (ActWin-E)
I've uploaded a raw program from an old Hitachi EC-40HARP that is to be replaced by something else. I have to do some reverse engineering as the...
Replies
1
Views
432
xzen
xzen
L
Programming Hitachi EC2
I have an old Hitachi EC2-28HRP. I have the program files ready to upload into the PLC, but not sure what I need (i.e. software). ActSip E has...
Replies
2
Views
1,052
lighthouseplcs
L
P
Hitachi EC-Series PLC need of the software
Hi Guys I have an Old PLC Hitachi EC2-D60HRP that I am in urgent need of the Software to make few modifications Anyone can I assist with the...
Replies
0
Views
745
PLCfood
P
D
Hitachi P-250E
I am posting this as I am at a loss on where else to look. We have a 30 year old Mitsubishi Injection molding machine run by a Hitachi P-250E PLC...
Replies
5
Views
3,041
dougpdf
D
A
upload program HITACHI HIZAC E-64HR & OMRON 3G8B2-M8913
We want to upload program the following PLC, and downloading to Our Spare. And also we want keep program in file . Could You give quotation for...
Replies
0
Views
1,224
ariow
A
Back
Top Bottom