How good step 7 v14 for total beginner in plc and programming

[abdq]

Or do you have any suggestions?

 

[gclshortt]

http://www.plctalk.net/qanda/showthread.php?t=23866

http://www.plctalk.net/qanda/showthread.php?t=13534

http://www.plctalk.net/qanda/showthread.php?t=3184

The above links are previous threads that are similar to yours.
I would also look that the following:

SIMATIC S7-300 Getting Started for First Time Users
Programming with STEP 7 - Siemens Global Website
Working with STEP 7 - Siemens Support

Hope this helps you out.
Regards,

 

[geniusintraining]

Hope this helps you out...

A for effort I guess? but you sent him links for a different software, not sure how that can help

abdq, try searching YouTube, Siemens has made a few videos that should help, dont just look for V14, the others will help you also

https://www.siemens.com/global/en/h.../automation-software/tia-portal/software.html

https://www.youtube.com/watch?v=5bXyJJuedMs&list=PLdTU9QpgG0a0sIcNxKGQF5mQVpFM_tfze

https://www.youtube.com/watch?v=wnntZg3CHdI&t=2s

 

[abdq]

A for effort I guess? but you sent him links for a different software, not sure how that can help

abdq, try searching YouTube, Siemens has made a few videos that should help, dont just look for V14, the others will help you also

https://www.siemens.com/global/en/h.../automation-software/tia-portal/software.html

https://www.youtube.com/watch?v=5bXyJJuedMs&list=PLdTU9QpgG0a0sIcNxKGQF5mQVpFM_tfze

https://www.youtube.com/watch?v=wnntZg3CHdI&t=2s

even those have different purpose I'm fine with

thank you for the response.