Jack Schit
Member
Hi All,
I currently have a WinCC Flex project running on Simatic panel PC 677B with a CPU 315 2-DP PLC communicating over MPI.
I would like to add an extra PLC (another CPU 315 2-DP) to the WinCC Flex project also communicating over MPI.
However, the panel PC only has one MPI port. Is there some way around this e.g. USB to MPI etc...
Thanks
Jack
I currently have a WinCC Flex project running on Simatic panel PC 677B with a CPU 315 2-DP PLC communicating over MPI.
I would like to add an extra PLC (another CPU 315 2-DP) to the WinCC Flex project also communicating over MPI.
However, the panel PC only has one MPI port. Is there some way around this e.g. USB to MPI etc...
Thanks
Jack