how to connect thermal printer with HMI serial port.

amitsaklani

Member
A
Join Date
May 2015
Location
Delhi
Posts
1
Hi!

i am having a 3.5" colour HMI with serial printer port, how can i attached thermal printer with this can any one help me.

hmi make :- selec
 

Similar Topics

J
help to connect thermal printer with HMI serial port
hi! i am doing a project where . i have HMI with serial printer port. now manufacture cliam that any serial printer will work with HMI. now on...
Replies
2
Views
2,347
Aabeck
Aabeck
Z
SCADA Pack RTU 474, IO card (5606) Not responding in Remote Connect
Hi, We have been facing a issue with SCADAPack 474. Configuration is like below. RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module Only...
Replies
0
Views
54
Zubairjaved786
Z
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
335
JesperMP
JesperMP
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
121
Chris3EC
C
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
150
Para
P
Back
Top Bottom