Problem: If an application has accidentally been set to autorun with no means of exiting the project, it will continue to run that application even on reboot of the terminal.
Solution: The following utility will bring up the RSView ME Configuration screen where the user can set ME to disable the project autorun option.
Steps:
Method
- Rename the appropriate attached file to autorun.exe and copy the file to a compact flash card. There are two attached files, one for the PanelView Plus 400 and 600 terminals, another for the PanelView Plus 700, 1000, 1250, and 1500 terminals. Caution: Before make the change to Autorun.exe, ensure your winodws explorer is set up to display the extension. To change that on your PC, while in windows explorer click the tools pull down=>folder options=>View tab. in the window, right at the bottom there is a check box for "Hide Extension for Known File Types", Uncheck that box and click OK. Now you can change the file name.
- Insert the compact flash card into the terminal. The program will automatically execute. (The execution of this program is silent. There is no user interface and no indication that the program had run.)
- Wait 30 seconds.
- Remove the compact flash card.
- Reboot the terminal.
- Re-configure your terminal settings as desired.
Be sure you read all of this.
File is attached..