How to reset G120 fault over ProfiNet?
- Thread starter AdamG8GXP
- Start date
seppoalanen
Member
#CRW is Output type ctrl word
#CONTROL.ACK_FAULT is bit 1.7 of DIW18 (in STAT) [remember Simatic byte order!]
Part of FB:
#CONTROL.ACK_FAULT is bit 1.7 of DIW18 (in STAT) [remember Simatic byte order!]
Part of FB:
Last edited:
Similar Topics
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ?
Have to shut off main switch at least 10 times on...
I was loading a program onto an XE1e2 PLC and it got stuck on these two windows and won't progress. It won't let me connect from the PC to reload...
Hi all, i have recieved some 4RF Aprisa SR+ ethernet radios from a customer to configure.
Issue is that they are used and have non-default...
Hi Guys,
I have a 1769-L24-QBFCB1 that has the OK light flashing on the embedded counter module. The manual states it is a resettable fault, but...
We are using RED LION HMI Since las 15 years. To day we have found that My log file has data up to 22 Mar 2024 1:16. Then After new Log File is...