Anthony PLC
Member
Pylogix connections to Micro8xx need the .Micro800 member assigned a value of True; see the Add this line above, that may fix it.
Thanks dr.bitboy.
I tried adding the line comm.Micro800 = True but that didn't make it work either. I also added comm.ProcessorSlot = 0 ( for the Micro800 PLC's) but no luck yet.
I'm able to ping the PLC from my computer but when I try to get all the tags from the PLC, using pylogix, it just shows a message which reads "No Tags Retrieved". I've attached a snapshot of the GUI and the additional lines of code in Pylogix for reference.
Any suggestions would be really helpful. Thanks in advance !!